| 护坡模具在选择的时候最好注意以下几点 |
| 添加时间：2021/1/20 13:39:35 浏览次数： |
| 护坡模具在选择的时候最好注意以下几点: It is better to pay attention to the following points when selecting: 1、不要过于比较价格,买便宜的模具不如买耐用的模具,这样可以减少产品不合格的风险。 1. Don't compare prices too much. It's better to buy durable molds than cheap ones, which can reduce the risk of unqualified products. 2、粉碎回料做的护坡模具,表面上会有很多黑点,浑浊不光亮,加力变形大。 2. There will be many black spots on the surface of the slope protection mold made of crushed materials, which is turbid and not bright, and has large afterburner deformation. 3、护坡模具的外观要精美,护坡模具外观上不要有太多的飞边毛刺和刀销的痕迹。凡是外观粗糙的产品,质量也不好到哪去。 3. The appearance of the slope protection mould shall be exquisite, and there shall not be too many flash burr and knife pin trace on the appearance of the slope protection mould. The quality of products with rough appearance is not good. 4、在购买护坡模具时最好到专业生产护坡模具的厂家。 4. When purchasing slope protection mould, it is better to go to the manufacturer specializing in the production of slope protection mould |
| 上一页 护坡模具为白色聚丙烯塑料注塑成型，形状尺寸多样 |
| 下一页 护坡模具的生产主要有沿海地区 |